Nathan Patterson has joined the Navy and obviously will not be active at Glencoe for quite some timePhotos of track work on the extension and new engine for #5205.

 Saturday, Feb 16:

Car barn: Jim Scott and (Car barn crew of) finished the brake flat #151 and checked the coupler height again. It was ok. 

 Roundhouse: No Report

Machine Shop: Jim Strain found out just how difficult it is to put springs in a truck. (per Mr. Scott) He put one of the #400 tender trucks back together. He has been turning the tender wheels of #400 and #535 on a lathe in the machine shop to true them up. 

Building & Grounds: Hank Welch and Mike Lorance were in the roundhouse putting new lights up.

Maintenance of Way: - track work continues as weather permits on the extension (see pictures below)

           

 Sunday, Feb 17

Car barn:  No Report  
Roundhouse: No Report
Machine Shop: No Report
Building & Grounds: No Report
Maintenance of Way: No Report 

Wednesday, Feb 20

Roundhouse: Tabernacki replaced missing screws at rear of 704's cab and checked direct                    connection between Kohler engine and hydrostatic pump.

Machine Shop:  No Report

Building & Grounds:  Lorance & Welch contiued replacing ceiling lights in the Round House. Sun glasses may be needed when they finish.

Maintenance of Way:  No Report